Sensor Difuso Reflectivo E3z - D82, Sumobot, Minisumo

Sensing method Diffuse-reflective.

Sensing distance 0m to 1m (White paper 300 x 300 mm).

Differential distance 20% Max. of sensing distance.

Light source Infrared LED.

Power supply voltage 12 to 24 VDC -10% to 10% (ripple (p-p) 10% Max).

Current consumption 30 mA DC Max.

Control output (Output type) PNP open collector output.

Control output (Load current) 0 to 100 mA.

Control output (Residual voltage) (DC) 1 V Max. (Load current: Less than 10mA).

(DC) 2 V Max. (Load current: 10 to 100 mA).

Operation mode Light-ON/Dark-ON selectable.

Load power supply voltage 26.4 VDC Max.

Protective circuit Surge suppressor.

Output short-cut protection.

Output short-circuit protection.

Power supply reverse polarity protection.

Mutual interference prevention.

Response time 1 ms Max.

Sensitivity setting Single-turn adjustment.

Ambient illuminance Incandescent lamp: 3000 lux Max., Sunlight: 10000 lux Max.

Ambient temperature Operating: -25 to 55.

Storage: -40 to 70.

(with no icing or condensation).

Ambient humidity Operating: 35 to 85%.

Storage: 35 to 95%.

(with no icing or condensation).

Insulation resistance 20 MOhm Min. at 500 VDC between charged parts and the case

Dielectric strength 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case

Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions.

Shock resistance 500 m/s**2 for 3 times each in X, Y, and Z directions.

Degree of protection IEC60529: IP67.

Connection method Pre-wired models (Cable length: 2 m).

Indicator Operation indicator (orange), Stability indicator (green).

Tightening torque 0.5 N·m Max. (with M3 screw).

Material (case) PBT.

Material (lens) Denatured Polyarylate.

Accessories Instruction manual.